Sent Datasheet sending
Sending the product data sheet to your e-mail address.
Inquiry sent Information
Request information about the product to your e-mail address.
Instruments / Digital multimeters BackHOLDPEAK 90CDigital multimeter, VDC, VAC, ADC, AAC, resistance, capacity, diode, hFE, break, battery test.
Digital multimeter with LCD display suitable for measuring many electrical units.
- Digital multimeter. - Manual measurement limit switching. - 3.1/2 digit LCD display with backlight. - Manual device and backlight on/off. - Maximum value display: 1999. - Polarity-independent measurement (in case of reversed polarity - display). - Low battery voltage indication. - Keeping the last measured value on the display. - VDC measurement range/display resolution/accuracy: - 200mV / 0.1mV / +/-0.5%. - 2V / 1mV / +/-0.8%. - 20V / 10mV / +/-0.8%. - 200V / 100mV / +/-0.8%. - 1000V / 1V / +/-0.8%. - Input resistance in VDC measurement mode: 10Mohm. - Overvoltage protection. - VAC measurement range/display resolution/accuracy: - 2V / 1mV / +/-1.2%. - 20V / 10mV / +/-1.2%. - 200V / 100mV / +/-1.2%. - 750V / 1V / +/-1.2%. - AC voltage frequency range: 40Hz-400Hz. - ADC measurement range/display resolution/accuracy: - 2mA / 1uA / +/-1.5%. - 20mA / 10uA / +/-1.5%. - 200mA / 100uA / +/-1.5%. - 20A / 10mA / +/-3%. - AAC measurement range/display resolution/accuracy: - 2mA / 1uA / +/-1.8%. - 20mA / 10uA / +/-1.8%. - 200mA / 100uA / +/-1.8%. - 20A / 10mA / +/-3%. - Resistance measurement range/display resolution/accuracy: - 200ohm / 0.1ohm / +/-1.5%. - 2kohm / 1ohm / +/-0.8%. - 20kohm / 10ohm / +/-0.8%. - 200kohm / 100ohm / +/-0.8%. - 2Mohm / 1Kohm / +/-1.5%. - 20Mohm / 10kohm / +/-2%. - Capacity measurement range/display resolution/accuracy: - 200uF / 0.01pF / 0.01uF-10uF: +/-2.5%, 10uF-200uF: +/-9%. - Element test range/display resolution/accuracy: - 1.5V / 10mV / +/-2.5%. - 9V / 10mV / +/-2.5%. - 12V / 10mV / +/-2.5%. - Transistor hFE testing. - Measurement of NPN and PNP transistors. - HFE range: 0-1000. - Test voltage/current: Ib=10uA/Vce=3V. - Diode test. - Tear test with sound signal. - Measuring tape. - Fold-out support bracket. - Power supply: 9VDC from 6F22 battery. - Operating temperature: 0°C-40°C. - Operating humidity: maximum 85%. - Dimensions: 143mm x 75mm x 32mm. - Weight: 200g (with battery). - CE certification. - More information and all HOLDPEAK products: holdpeak.hu
Most often purchased with the product:BSN-1
DIAMEC 6V 4.5Ah
S. AM CR80 ISO 125 kHz
PARADOX K32 LCD+
S. AM Proximity card case No.1 white
Crimping sleeve orange-black 10139
LUXURY
DSC LC200
Instruments / Digital multimetersBack New page ![]() × | ||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2026 deltonglobal.com © | DELTON | All rights reserved.
|
||||||||||||||||||||||||||||||||||||||||||||||||||